The FUHR 859 Type 1 Lever Operated Latch & Deadbolt – 4 Roller has 30mm or 35mm backset and has 92mm centres.is split spindle and has a latch & deadbolt centre case.
Gearbox
The latch & deadbolt gearbox has a split spindle.
Additional Locking Points
In addition to the locking points within the gearbox, the full length strip has 4 roller locking points.
Faceplate
16mm wide faceplate, ideal for use on UPVC & composite applications.
Locking Point Distances
Locking Point Distance A = 337mm
Locking Point Distance B = 362mm
Locking Point Distance C = 731mm
Locking Point Distance D = 780mm
Croppable
This full length unit is croppable to allow the strip height to be reduced to suit the door it is being installed into.
Handing
The latch can be reversed by locating the Allen screw on the side of the lockcase, in line with the latch. Remove the screw, pull out and reverse the latch, and refit the Allen screw.
Sprung/Unsprung
The gearbox is sprung and incorporates an internal spring mechanism to assist with lever return, removing the need for sprung handles or a separate spring cassette.
Operation
Locking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.